Layton Technologies USA Follow us on twitter
  Contact Layton Technologies on + 44 (0) 1782 370400
Ultrasonic Systems
 
Special Systems
spacer
spacer
Layton Enquiries
spacer
spacer
  
Phone +44 01782 370400 ISO 9001 Certified - link to our certificates

Industrial Standard Benchtop Ultrasonic Tanks, Generators & Immersibles

Introduction to Ultrasonic CleaningIntroduction to Ultrasonic Cleaning

Ultrasonic Wattage Calulator
Our Calculator will give you a minimum wattage needed for your tank specification in Layton equipment.





You need a minimum of WATTS
 

Specification
Standard and bespoke sizes available.
Single tank aqueous ultrasonic cleaning system with the following features:
  • All stainless steel
  • BSP drain valve
  • Heated tank
  • Thermostatically controlled
  • Bolt in transducer plate
  • Separate generator (see below)
  • Tank size (range of sizes)
  • Overall size (to suit requirements)
  • Capacity (variations)
  • Industrial standard - continually rated
  • Insulated frame
  • Basket & lid inclusive
  • Table top mounted
  • Operates from standard mains volatage
  • CE certified
 

Industrial Benchtop Ultrasonic Cleaner

industrial benchtop ultrasonic cleaner
Ultrasonic Generator Specification
  • Chassis case designed to allow access from all sides
  • Case for generator complete with power lead
  • Full range of variable frequency sweep control
  • Full range of variable power control
  • On/Off switch with output power indicator
  • 240v, 50hz supply
  • Maximum 750 watt power output (nominal 500watt)
  • Utilising MOSFET technology
  • Fully tried and tested in the field
  • Fully protected against open and short circuit output
  • CE certified

Ultrasonic Generator & Immersibles

ultrasonic generator and immersibles
Immersible Transducer Specification
  • Hermetically sealed welded housing
  • Manufactured entirely from 316 stainless steel
  • Aluminium bars permanently bonded to the underside of the active face
  • Piezoelectric transducers mounted, in pairs, to the aluminium bars
  • Stainless steel braided flexible hose with PTFE bore
  • Special bulkhead fitting if required
  • Terminal box with co-axial cable and plug for connection to the generator
  • PTFE sealing washer for leak tight joint below fluid level
  • CE Certified
Ultrasonic Immersibles

ultrasonic immersibles
 

   Solvent Systems - Blueseal   | Aqueous Systems - Multistage / Special / Bluestone  |  Ultrasonics & Immersibles  | Wet Benches / Vapour Driers / S+K and SCS /  Service & Spares  |  Business Center  |  Downloads  | Sitemap
 
email us at websales@laytontechnologies.com
Contact Layton Technologies on + 44 (0) 1782 370400
Layton address : parkhall business village, staffordshire st3 5xa